×
×

range of wood stoves

Type of fire
Side
Properties
×
×

range of gas stoves

Type of fire
Side
Properties
×
×

range of pellets stoves

Type of fire
Side
Properties
×

contact us

EN

Stûv 30-H accumulation

Take advantage of the accumulation of heat!

The Stûv 30-H can be fitted with an accumulator core which stores some of the heat. Once the fire has gone out, the accumulated heat is released over several hours, thus prolonging the sensation of heat and comfort.

Explore the accumulation system

Heat storage

The Stûv 30-H can be fitted with a storage core that stores part of the heat.
Once the fire has gone out, the stored heat continues to disperse over several hours, extending the feeling of warmth and well-being.

3-door system

  • With the glass door, you can make the most of watching the flames in complete safety and with excellent output. Proof of its economic and eco-friendly operation.
  • In idling (smouldering) mode, the solid door with its heat loop channels heat to the storage core. This hides the combustion chamber when the stove is not being used.
  • In open fire mode, you can hear the flames crackling, breathe in the lovely smell of the fire.... Or you can also have a barbeque.

Powerful and efficient

The third-generation Stûv 30 ensures highly efficient combustion. The glass stays clean for longer and the output can easily be adjusted between 6 and 12 kW.

Profit by 360%

In order to take maximum advantage of the enveloping heat and the unrestricted view of the flames, the Stûv 30 can be installed on an invisible swivel base. So, for example, you can point the stove towards the lounge, and then towards the dining room.

Connection to outside air

The Stûv 30-H can be connected to the outside air, either from beneath or behind.
This increases the total output of the installation, without interfering with the mechanical ventilation.

Combustion technique

  1. Combustion air.
    Illustration with direct air intake under the stove. The external air intake can also be located at the rear of the device.
  2. Combustion.
    The air intake, the combustion chamber and smoke evacuation form an air-tight system.
  3. The air is captured in the living room and is heated by the device.
  4. The convection air circulates throughout the combustion chamber and captures heat from the smoke.
  5. The heated air comes out of the device naturally and spreads within the room.
  6. The smoke is evacuated into the flue. Illustration with top outlet, also exists with rear outlet.
  7. Purge air chases the smoke from the window. This way, you can continuously benefit from watching the flames.

Ash container

The Stûv 30-H has a built-in ash container.

Contrary to received wisdom, frequent ash removal is not necessary. You should leave a bed of ash in the combustion chamber to insulate the chamber and sole plate from the heat of combustion.

Floor plates

To protect your floor coverings, Stûv has defined special floor plates for this stove.
Round or oval shape, grey steel, StûvGrey or stainless steel finish.

Accessories

A practical and user-friendly range of accessories: barbecue, log trolley, storage box.

Explore

Technical information

Technical informations about your stove installation ( PDF format )

Download the pdf

Specifications

Technical informations like power, emissions, dimensions, 3D drawings and technical charts on our technical website

Technical site

E-Catalogue

Discover the brochure of the Stûv 30 range

Browse or download brochure

Realisations

Discover our realisations

Discover the pictures on Pinterest